SGS IAAF Certificated Courts Sports Surface Flooring Athletic Running Track
The 13mm ventilated plastic runway construction process is a two-step construction method.
The bottom layer of the granules was laid to a thickness of 10-11 mm. After curing, a PU adhesive layer of EPDM particles having a thickness of 2-3 mm was sprayed thereon. (Note: If the height of the site is not uniform, the thickness of the paving should be determined according to the site conditions to ensure the flatness after the paving is completed).
Process sketch: cleaning the site → particle bottom machinery (manual) paving → runway topcoat spraying → measuring line → completion.
Construction plan description
Preparation before plastic track construction
After the plastic track construction team enters the market, first check the type and quantity of all materials, list them, and submit them to the supervisor for signature.
Check if the mechanical equipment such as the mixer and the push rod are working properly, find the problem and repair it in time. Prepare the construction tool and adjust the thickness and thickness of the machine according to the thickness required by the construction drawings. Conduct spot checks on the materials on site and prepare a test piece for each lot number. The material was found to have deteriorated and the color change should be stopped. If there is sediment, make it even.
According to the actual situation of the plastic runway project, the construction section is appropriately divided, and the construction line position and construction line are measured.
Plastic track compounding personnel should carefully check the type and type of raw materials, confirm that they are the same materials as the construction site, so that the materials are stacked on the shelves, neatly arranged, and the barrels can be reserved.