High Temperature Binder-MDI
Polyurethane adhesive is a single component of wet curing material, with low VOC content, no environmental pollution, adjustable toughness, simple bonding process, and good bonding adaptability with a variety of base materials.
1. Technical indicators
Colorless or light yellow transparent liquid, does not contain heavy metal and phthalic plasticizer and other restricted substances, can pass the domestic and foreign environmental protection laws and regulations (new national standards/Shanghai standards and other standards).
Product code: MG
Project technical indicators
Density (20℃), g/ml 1.05-1.15
Viscosity (25℃), mPa. S 2000-3500
Tensile strength /MPa ≥0.4
Elongation at break /% ≥40
Solid content /% ≥99
Flame retardant grade/Ι
2. Performance characteristics
(1) solvent-free products are environmentally friendly, odorless and free of TDI;
(2) high solid content, high bonding strength, high toughness, strong adhesion, wear-resisting, threshing resistant;
(3) simple construction, can be used directly, without mixing, convenient operation, curing time can be adjusted.
(4) excellent water resistance, heat resistance, cold resistance, aging resistance, resistance to yellow, resistance to acid and alkali corrosion and other excellent characteristics.
4. Storage and packaging
In a cool and dry place, avoid direct sunlight, and the storage temperature is less than 30℃.Warranty 6 months, after the expiration of the test can be used normally.Please keep sealed.